Hertz Mille ML 2000.3 LEGEND
4Ω
Subwoofer
Nominal diameter | 8″ / 200 mm |
Resonance | 40 Hz |
Q factor | 0.56 |
Sensitivity | 81.8 dB |
Linear excursion | ± 13 mm |
Program Power | 1400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 81.8dB
- Frequency response 30 - 600Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 40Hz
- Mechanical quality factor QMS 5.00
- Electrical quality factor QES 0.63
- Total quality factor QTS 0.56
Large signal parameters
- Maximum linear excursion xmax 13mm
- Maximum excursion before damage xlim 23mm
- Air volume displaced at xmax VD 275cm³
- Power handling P 700W
- Program power Pmax 1400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 2.7Ω
- Inductance (1kHz) LE 0.72mH
- VC Diameter 100mm
Magnet
- Force factor Bl 11N/A
- Motor constant Bl/√RE 6.69N/√W
- Diameter 95mm
- Height 5mm
- Material Neodymium
Diaphragm
- Effective diameter 165mm
- Effective area SD 211cm²
- Moving mass MMS 110g
- Moving mass (without air load) MMD 108g
- Material Pressed-pulp cone with mineral powders
Suspensions
- Stiffness KMS 6.67N/mm
- Compliance CMS 150µm/N
- Equivalent volume to the compliance VAS 9.5L
- Mechanical resistance RMS 5.53N·s/m
Dimensions
- Nominal diameter 8″
- 200mm
- Overall diameter 217mm
- Baffle cutout diameter 138mm
- Overall depth 138mm
- Flange thickness 21mm
- Mounting depth 117mm
- Volume occupied by the driver (estimated) 2.1L
- Net weight 6.12kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





