Hertz SPL Show SS 12 D2
2x2Ω
Subwoofer
Nominal diameter | 12″ / 300 mm |
Resonance | 36 Hz |
Q factor | 0.64 |
Sensitivity | 84.8 dB |
Linear excursion | ± 15.4 mm |
Program Power | 2000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.8dB
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 7.00
- Electrical quality factor QES 0.70
- Total quality factor QTS 0.64
Large signal parameters
- Maximum linear excursion xmax 15.4mm
- Maximum excursion before damage xlim 20.7mm
- Air volume displaced at xmax VD 765cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.8Ω
- Inductance (1kHz, in series) LE 3.6mH
- VC Diameter 75mm
Magnet
- Force factor (in series) Bl 18.7N/A
- Motor constant Bl/√RE 9.56N/√W
- Diameter 170mm
- Height 40mm
- Material Ferrite
Diaphragm
- Effective diameter 253mm
- Effective area SD 497cm²
- Moving mass MMS 283g
- Moving mass (without air load) MMD 275g
- Material Non pressed paper with cotton fibre
Suspensions
- Stiffness KMS 14.3N/mm
- Compliance CMS 70µm/N
- Equivalent volume to the compliance VAS 24.5L
- Mechanical resistance RMS 9.14N·s/m
Dimensions
- Nominal diameter 12″
- 300mm
- Overall diameter 320mm
- Baffle cutout diameter 283mm
- Overall depth 184mm
- Flange thickness 23mm
- Mounting depth 161mm
- Volume occupied by the driver (estimated) 4.1L
- Net weight 8.8kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





