JL Audio 10W1v2-8
4Ω
8Ω
Subwoofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 26.5 Hz |
| Q factor | 0.44 |
| Sensitivity | 84.7 dB |
| Linear excursion | ± 10 mm |
| Program Power | 600 W |
Discontinued
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.7dB
Thiele & Small parameters
- Resonance frequency (free air) fS 26.5Hz
- Mechanical quality factor QMS 6.12
- Electrical quality factor QES 0.47
- Total quality factor QTS 0.44
Large signal parameters
- Maximum linear excursion (one way) xmax 10mm
- Air volume displaced at xmax VD 345cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.7Ω
- Inductance (1kHz, estimated) LE 3.66mH
Magnet
- Force factor Bl 17.1N/A
- Motor constant Bl/√RE 6.62N/√W
- Diameter 115mm
Diaphragm
- Effective diameter 210mm
- Effective area SD 345cm²
- Moving mass MMS 124g
- Moving mass (without air load) MMD 119g
Suspensions
- Stiffness KMS 3.44N/mm
- Compliance CMS 291µm/N
- Equivalent volume to the compliance VAS 49.1L
- Mechanical resistance RMS 3.37N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 267mm
- Baffle cutout diameter 230mm
- Mounting depth 110mm
- Volume occupied by the driver 0.71L
- Net weight 3.54kg
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.webp.webp)
.png.webp)
.jpg.webp)