KICKER SoloX 49L7X122
2x1Ω
2x2Ω
Subwoofer
| Nominal size | 12x12″ / 300x300 mm |
| Resonance | 41.6 Hz |
| Q factor | 0.51 |
| Sensitivity | 86.6 dB |
| Linear excursion | ± 31.3 mm |
| Program Power | 2000 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.6dB
- Frequency response 20 - 100Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 41.6Hz
- Mechanical quality factor QMS 7.28
- Electrical quality factor QES 0.54
- Total quality factor QTS 0.51
Large signal parameters
- Maximum linear excursion (one way) xmax 31.3mm
- Air volume displaced at xmax VD 1830cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.6Ω
- Inductance (1kHz, in series) LE 4.49mH
- VC Diameter 75mm
- Winding height HVC 62.5mm
Magnet
- Force factor (in series) Bl 25.9N/A
- Motor constant Bl/√RE 13.6N/√W
Diaphragm
- Effective diameter 273mm
- Effective area SD 586cm²
- Moving mass MMS 387g
- Moving mass (without air load) MMD 378g
Suspensions
- Stiffness KMS 26.4N/mm
- Compliance CMS 37.5µm/N
- Equivalent volume to the compliance VAS 18.4L
- Mechanical resistance RMS 13.9N·s/m
Dimensions
- Nominal size 12 x 12″
- 300 x 300mm
- Mounting baffle cutout 281 x 281mm
- Overall depth 270mm
- Flange thickness 13mm
- Mounting depth 257mm
- Volume occupied by the driver (estimated) 12L
- Net weight 11.5kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.webp.webp)
.png.webp)