LaVoce WAN082.01
8Ω
Woofer
| Nominal diameter | 8″ / 200 mm |
| Resonance | 85 Hz |
| Q factor | 0.32 |
| Sensitivity | 93.7 dB |
| Linear excursion | ± 5.8 mm |
| Program power | 400 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.7dB
- Frequency response 80 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 85Hz
- Mechanical quality factor QMS 4.80
- Electrical quality factor QES 0.35
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion (one way) xmax 5.8mm
- Maximum excursion before damage xlim 9.8mm
- Air volume displaced at xmax VD 128cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.1Ω
- Inductance (1kHz) LE 0.36mH
- VC Diameter 51mm
- Winding height HVC 15.7mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 14.5N/A
- Motor constant Bl/√RE 6.4N/√W
- Air gap height HAG 8mm
- Diameter 102mm
- Height 7mm
- Material Neodymium
Diaphragm
- Effective diameter 167mm
- Effective area SD 220cm²
- Moving mass (including air load) MMS 26.5g
- Moving mass MMD 24.2g
- Material Water resistant treated paper
Suspensions
- Stiffness KMS 7.63N/mm
- Compliance CMS 131µm/N
- Equivalent volume to the compliance VAS 9L
- Mechanical resistance RMS 2.95N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 8″
- 200mm
- Volume occupied by the driver 0.65L
- Net weight 2.3kg
- Frame material Aluminium
.png)
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.jpg.webp)
.jpg.webp)