LaVoce WAN143.00
8Ω
Woofer
Nominal diameter | 13.5″ / 340 mm |
Resonance | 45 Hz |
Q factor | 0.35 |
Sensitivity | 95.3 dB |
Linear excursion | ± 7.5 mm |
Program Power | 1000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.3dB
- Frequency response 45 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 45Hz
- Mechanical quality factor QMS 4.96
- Electrical quality factor QES 0.38
- Total quality factor QTS 0.35
Large signal parameters
- Maximum linear excursion xmax 7.5mm
- Maximum excursion before damage xlim 13.4mm
- Air volume displaced at xmax VD 535cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 0.8mH
- VC Diameter 75mm
- Winding height HVC 20.3mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 18.7N/A
- Motor constant Bl/√RE 8.12N/√W
- Air gap height HAG 10.5mm
- Diameter 75mm
- Height 10mm
- Material Neodymium
Diaphragm
- Effective diameter 301mm
- Effective area SD 713cm²
- Moving mass MMS 87g
- Moving mass (without air load) MMD 74.2g
- Material Water Resistant Treated Paper + Water Proof Front Side Treatment
Suspensions
- Stiffness KMS 6.99N/mm
- Compliance CMS 143µm/N
- Equivalent volume to the compliance VAS 103L
- Mechanical resistance RMS 4.96N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 13.5″
- 340mm
- Volume occupied by the driver 3.2L
- Net weight 5.1kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





