LaVoce WSF102.00

• Sensitivity (1W, 1m, infinite baffle) SPL1W 94.4dB
• Frequency response 60 - 4000Hz

Thiele & Small parameters

• Resonance frequency (free air) fS 65Hz
• Mechanical quality factor QMS 5.73
• Electrical quality factor QES 0.48
• Total quality factor QTS 0.45

Large signal parameters

• Maximum linear excursion xmax 5.2mm
• Maximum excursion before damage xlim 9.4mm
• Air volume displaced at xmax VD 182cm³
• Power handling P 175W
• Program power Pmax 350W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 5.2Ω
• Inductance (1kHz) LE 0.5mH
• VC Diameter 51mm
• Winding height HVC 14.6mm
• Winding material Copper Clad Aluminium
• Former material Glass Fiber

Magnet

• Force factor Bl 11.6N/A
• Motor constant Bl/√RE 5.1N/√W
• Air gap height HAG 8.2mm
• Diameter 140mm
• Height 17mm
• Material Ferrite

Diaphragm

• Effective diameter 211mm
• Effective area SD 350cm²
• Moving mass MMS 30.4g
• Moving mass (without air load) MMD 25.8g
• Material Water Resistant Treated Paper + Water Proof Front Side Treatment

Suspensions

• Stiffness KMS 5.1N/mm
• Compliance CMS 196µm/N
• Equivalent volume to the compliance VAS 34L
• Mechanical resistance RMS 2.17N·s/m
• Surround material Polycotton

Dimensions

• Nominal diameter 10″
• 250mm
• Volume occupied by the driver 1.2L
• Net weight 3.2kg
• Frame material Steel