LaVoce WSF122.50
8Ω
Woofer
| Nominal diameter | 12″ / 300 mm |
| Resonance | 49 Hz |
| Q factor | 0.33 |
| Sensitivity | 95.2 dB |
| Linear excursion | ± 4.7 mm |
| Program Power | 500 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.2dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 49Hz
- Mechanical quality factor QMS 5.54
- Electrical quality factor QES 0.35
- Total quality factor QTS 0.33
Large signal parameters
- Maximum linear excursion xmax 4.7mm
- Maximum excursion before damage xlim 8.8mm
- Air volume displaced at xmax VD 250cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.76mH
- VC Diameter 65mm
- Winding height HVC 13.4mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Force factor Bl 17.1N/A
- Motor constant Bl/√RE 7.23N/√W
- Air gap height HAG 8.2mm
- Diameter 160mm
- Height 20mm
- Material Ferrite
Diaphragm
- Effective diameter 260mm
- Effective area SD 531cm²
- Moving mass MMS 58.5g
- Moving mass (without air load) MMD 50.1g
- Material Water Resistant Treated Paper + Water Proof Front Side Treatment
Suspensions
- Stiffness KMS 5.56N/mm
- Compliance CMS 180µm/N
- Equivalent volume to the compliance VAS 71.7L
- Mechanical resistance RMS 3.25N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 12″
- 300mm
- Volume occupied by the driver 2L
- Net weight 4.7kg
- Frame material Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.jpg.webp)
.jpg.webp)