Oberton 15B500
8Ω
Woofer
Nominal diameter | 15″ / 388 mm |
Resonance | 38.2 Hz |
Q factor | 0.27 |
Sensitivity | 96 dB |
Linear excursion | ± 7.3 mm |
Program Power | 1000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96dB
- Frequency response 38 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 38.2Hz
- Mechanical quality factor QMS 12.06
- Electrical quality factor QES 0.27
- Total quality factor QTS 0.27
Large signal parameters
- Maximum linear excursion xmax 7.3mm
- Air volume displaced at xmax VD 602cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 1.25mH
- VC Diameter 77mm
- Winding height HVC 20mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 1.2T
- Force factor Bl 22.9N/A
- Motor constant Bl/√RE 10N/√W
- Air gap height HAG 11mm
- Material Ferrite
Diaphragm
- Effective diameter 325mm
- Effective area SD 830cm²
- Moving mass MMS 114g
- Moving mass (without air load) MMD 97.5g
- Material Paper
Suspensions
- Stiffness KMS 6.58N/mm
- Compliance CMS 152µm/N
- Equivalent volume to the compliance VAS 146L
- Mechanical resistance RMS 2.28N·s/m
Dimensions
- Nominal diameter 15″
- 388mm
- Overall diameter 388mm
- Baffle cutout diameter 355mm
- Overall depth 172mm
- Volume occupied by the driver (estimated) 4.1L
- Net weight 7.8kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





