PHL audio 5011MNdU
8Ω
Subwoofer
Nominal diameter | 15″ / 380 mm |
Resonance | 38 Hz |
Q factor | 0.26 |
Sensitivity | 95.9 dB |
Linear excursion | ± 7.5 mm |
Program Power | 1000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.9dB
- Frequency response 40 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 38Hz
- Mechanical quality factor QMS 3.54
- Electrical quality factor QES 0.28
- Total quality factor QTS 0.26
Large signal parameters
- Maximum linear excursion xmax 7.5mm
- Maximum excursion before damage xlim 16mm
- Air volume displaced at xmax VD 669cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 1.69mH
- VC Diameter 77mm
- Winding height HVC 20mm
Magnet
- Force factor Bl 23.7N/A
- Motor constant Bl/√RE 10N/√W
- Air gap height HAG 10mm
- Diameter 140mm
- Material Neodymium
Diaphragm
- Effective diameter 337mm
- Effective area SD 892cm²
- Moving mass MMS 120g
- Moving mass (without air load) MMD 102g
Suspensions
- Stiffness KMS 6.67N/mm
- Compliance CMS 150µm/N
- Equivalent volume to the compliance VAS 169L
- Mechanical resistance RMS 8.09N·s/m
Dimensions
- Nominal diameter 15″
- 380mm
- Overall diameter 381mm
- Baffle cutout diameter 356mm
- Overall depth 182mm
- Flange thickness 13mm
- Mounting depth 169mm
- Volume occupied by the driver 4.4L
- Net weight 4.8kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





