Oberton 18B450
8Ω
Woofer
Nominal diameter | 18″ / 461 mm |
Resonance | 34.4 Hz |
Q factor | 0.34 |
Sensitivity | 95.6 dB |
Linear excursion | ± 7.3 mm |
Program Power | 1000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.6dB
- Frequency response 35 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 34.4Hz
- Mechanical quality factor QMS 8.03
- Electrical quality factor QES 0.36
- Total quality factor QTS 0.34
Large signal parameters
- Maximum linear excursion xmax 7.3mm
- Air volume displaced at xmax VD 805cm³
- Power handling P 500W
- Program power Pmax 1000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 1.49mH
- VC Diameter 77mm
- Winding height HVC 20mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 1.2T
- Force factor Bl 22.1N/A
- Motor constant Bl/√RE 9.62N/√W
- Air gap height HAG 11mm
- Material Ferrite
Diaphragm
- Effective diameter 376mm
- Effective area SD 1110cm²
- Moving mass MMS 153g
- Moving mass (without air load) MMD 126g
- Material Paper
Suspensions
- Stiffness KMS 7.14N/mm
- Compliance CMS 140µm/N
- Equivalent volume to the compliance VAS 242L
- Mechanical resistance RMS 4.11N·s/m
Dimensions
- Nominal diameter 18″
- 461mm
- Overall diameter 461mm
- Baffle cutout diameter 417mm
- Overall depth 193mm
- Volume occupied by the driver (estimated) 5.2L
- Net weight 8.55kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





