Oberton 18XB1500
8Ω
Woofer
Nominal diameter | 18″ / 461 mm |
Resonance | 35.8 Hz |
Q factor | 0.23 |
Sensitivity | 96.3 dB |
Linear excursion | ± 11 mm |
Program Power | 3000 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.3dB
- Frequency response 30 - 1000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 35.8Hz
- Mechanical quality factor QMS 10.52
- Electrical quality factor QES 0.23
- Total quality factor QTS 0.23
Large signal parameters
- Maximum linear excursion xmax 11mm
- Air volume displaced at xmax VD 1274cm³
- Power handling P 1500W
- Program power Pmax 3000W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 1.53mH
- VC Diameter 115mm
- Winding height HVC 29mm
- Winding material Copper
- Former material Glass fiber
Magnet
- Flux density B 1.1T
- Force factor Bl 31.6N/A
- Motor constant Bl/√RE 13.7N/√W
- Air gap height HAG 14mm
- Material Ferrite
Diaphragm
- Effective diameter 384mm
- Effective area SD 1158cm²
- Moving mass MMS 212g
- Moving mass (without air load) MMD 184g
- Material Paper with carbon fibers
Suspensions
- Stiffness KMS 8.93N/mm
- Compliance CMS 112µm/N
- Equivalent volume to the compliance VAS 193L
- Mechanical resistance RMS 4.53N·s/m
Dimensions
- Nominal diameter 18″
- 461mm
- Overall diameter 461mm
- Baffle cutout diameter 417mm
- Overall depth 209mm
- Volume occupied by the driver (estimated) 8.4L
- Net weight 16.8kg
- Frame material Die cast aluminium
.png)
Export this driver to a simulation software:
Closed Box Simulator·





