Oberton 8MB201
8Ω
Mid-range
Nominal diameter | 8″ / 203 mm |
Resonance | 67.7 Hz |
Q factor | 0.31 |
Sensitivity | 93 dB |
Linear excursion | ± 7 mm |
Program Power | 400 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93dB
- Frequency response 65 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 67.7Hz
- Mechanical quality factor QMS 6.24
- Electrical quality factor QES 0.33
- Total quality factor QTS 0.31
Large signal parameters
- Maximum linear excursion xmax 7mm
- Air volume displaced at xmax VD 140cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 0.8mH
- VC Diameter 51mm
- Winding height HVC 17.5mm
- Winding material Aluminium
- Former material Kapton
Magnet
- Flux density B 1.35T
- Force factor Bl 12.5N/A
- Motor constant Bl/√RE 5.21N/√W
- Air gap height HAG 7mm
- Material Ferrite
Diaphragm
- Effective diameter 160mm
- Effective area SD 200cm²
- Moving mass MMS 21g
- Moving mass (without air load) MMD 18.7g
- Material Paper with glassfiber
Suspensions
- Stiffness KMS 3.79N/mm
- Compliance CMS 264µm/N
- Equivalent volume to the compliance VAS 14.7L
- Mechanical resistance RMS 1.43N·s/m
Dimensions
- Nominal diameter 8″
- 203mm
- Overall diameter 225mm
- Baffle cutout diameter 187mm
- Overall depth 90mm
- Volume occupied by the driver (estimated) 1.1L
- Net weight 3.22kg
- Frame material Die cast aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





