PHL audio 1343
Fe
NdUWoofer
| Nominal diameter | 6.5″ / 170 mm |
| Resonance | 40 Hz |
| Q factor | 0.28 |
| Sensitivity | 89.6 dB |
| Linear excursion | ± 5 mm |
| Program Power | 200 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.6dB
- Frequency response 40 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 40Hz
- Mechanical quality factor QMS 4.82
- Electrical quality factor QES 0.29
- Total quality factor QTS 0.28
Large signal parameters
- Maximum linear excursion xmax 5mm
- Maximum excursion before damage xlim 10mm
- Air volume displaced at xmax VD 67cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.8Ω
- Inductance (1kHz) LE 0.624mH
- VC Diameter 38mm
- Winding height HVC 16mm
Magnet
- Force factor Bl 8.1N/A
- Motor constant Bl/√RE 3.36N/√W
- Air gap height HAG 6mm
- Diameter 118mm
- Material Ferrite
Diaphragm
- Effective diameter 130mm
- Effective area SD 133cm²
- Moving mass MMS 13.3g
- Moving mass (without air load) MMD 12.2g
Suspensions
- Stiffness KMS 0.833N/mm
- Compliance CMS 1200µm/N
- Equivalent volume to the compliance VAS 29.9L
- Mechanical resistance RMS 0.69N·s/m
Dimensions
- Nominal diameter 6.5″
- 170mm
- Overall diameter 163mm
- Baffle cutout diameter 146mm
- Overall depth 81mm
- Flange thickness 8mm
- Mounting depth 73mm
- Volume occupied by the driver 0.52L
- Net weight 2.44kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)