PHL audio 3430
8Ω
Mid Bass
Nominal diameter | 10″ / 250 mm |
Resonance | 56 Hz |
Q factor | 0.30 |
Sensitivity | 94.2 dB |
Linear excursion | ± 4.5 mm |
Program Power | 800 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 94.2dB
- Frequency response 60 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 56Hz
- Mechanical quality factor QMS 4.71
- Electrical quality factor QES 0.33
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 4.5mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 160cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.9Ω
- Inductance (1kHz) LE 1.04mH
- VC Diameter 64mm
- Winding height HVC 15mm
Magnet
- Force factor Bl 16N/A
- Motor constant Bl/√RE 6.59N/√W
- Air gap height HAG 8mm
- Diameter 172mm
- Material Ferrite
Diaphragm
- Effective diameter 213mm
- Effective area SD 356cm²
- Moving mass MMS 40g
- Moving mass (without air load) MMD 35.2g
Suspensions
- Stiffness KMS 5N/mm
- Compliance CMS 200µm/N
- Equivalent volume to the compliance VAS 36L
- Mechanical resistance RMS 2.99N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 255mm
- Baffle cutout diameter 229mm
- Overall depth 120mm
- Flange thickness 11mm
- Mounting depth 109mm
- Volume occupied by the driver 1.5L
- Net weight 5.8kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





