PHL audio 3001
Fe
NdUMid Bass
Nominal diameter | 10″ / 250 mm |
Resonance | 57 Hz |
Q factor | 0.32 |
Sensitivity | 93.6 dB |
Linear excursion | ± 4.5 mm |
Program Power | 400 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.6dB
- Frequency response 45 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 57Hz
- Mechanical quality factor QMS 5.35
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.32
Large signal parameters
- Maximum linear excursion xmax 4.5mm
- Maximum excursion before damage xlim 13mm
- Air volume displaced at xmax VD 160cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.4Ω
- Inductance (1kHz) LE 0.961mH
- VC Diameter 51mm
- Winding height HVC 13mm
Magnet
- Force factor Bl 15.9N/A
- Motor constant Bl/√RE 6.84N/√W
- Air gap height HAG 8mm
- Diameter 158mm
- Material Ferrite
Diaphragm
- Effective diameter 213mm
- Effective area SD 356cm²
- Moving mass MMS 45g
- Moving mass (without air load) MMD 40.2g
Suspensions
- Stiffness KMS 5.56N/mm
- Compliance CMS 180µm/N
- Equivalent volume to the compliance VAS 31.5L
- Mechanical resistance RMS 3.01N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 255mm
- Baffle cutout diameter 229mm
- Overall depth 120mm
- Flange thickness 11mm
- Mounting depth 109mm
- Volume occupied by the driver 1.4L
- Net weight 5.0kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·





