PHL audio 3450
Fe
NdMMid-range
| Nominal diameter | 10″ / 250 mm |
| Resonance | 94 Hz |
| Q factor | 0.34 |
| Sensitivity | 96.8 dB |
| Linear excursion | ± 2.5 mm |
| Program Power | 400 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 96.8dB
- Frequency response 150 - 4000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 94Hz
- Mechanical quality factor QMS 2.95
- Electrical quality factor QES 0.38
- Total quality factor QTS 0.34
Large signal parameters
- Maximum linear excursion xmax 2.5mm
- Maximum excursion before damage xlim 4mm
- Air volume displaced at xmax VD 94cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.0Ω
- Inductance (1kHz) LE 1.01mH
- VC Diameter 64mm
- Winding height HVC 11mm
Magnet
- Force factor Bl 15.7N/A
- Motor constant Bl/√RE 7.02N/√W
- Air gap height HAG 8mm
- Diameter 172mm
- Material Ferrite
Diaphragm
- Effective diameter 219mm
- Effective area SD 377cm²
- Moving mass MMS 32g
- Moving mass (without air load) MMD 26.9g
Suspensions
- Stiffness KMS 11.1N/mm
- Compliance CMS 90µm/N
- Equivalent volume to the compliance VAS 18.1L
- Mechanical resistance RMS 6.41N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 255mm
- Baffle cutout diameter 229mm
- Overall depth 120mm
- Flange thickness 11mm
- Mounting depth 109mm
- Volume occupied by the driver 1.5L
- Net weight 5.8kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)