PRV Audio 10W450
4Ω
8Ω
Woofer
| Nominal diameter | 10″ / 257 mm |
| Resonance | 63.1 Hz |
| Q factor | 1.58 |
| Sensitivity | 93.3 dB |
| Linear excursion | ± 3.9 mm |
| Program power | 450 W |
Discontinued
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.3dB
- Frequency response 75 - 6500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 63.1Hz
- Mechanical quality factor QMS 19.31
- Electrical quality factor QES 1.72
- Total quality factor QTS 1.58
Large signal parameters
- Maximum linear excursion (one way) xmax 3.9mm
- Air volume displaced at xmax VD 151cm³
- Power handling P 225W
- Program power Pmax 450W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.9Ω
- Inductance (1kHz) LE 0.65mH
- VC Diameter 50.8mm
- Winding height HVC 10.5mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 6.81N/A
- Motor constant Bl/√RE 2.8N/√W
- Air gap height HAG 5.5mm
- Material Ferrite
Diaphragm
- Effective diameter 223mm
- Effective area SD 391cm²
- Moving mass (including air load) MMS 34.3g
- Moving mass MMD 29g
Suspensions
- Stiffness KMS 5.38N/mm
- Compliance CMS 186µm/N
- Equivalent volume to the compliance VAS 39.6L
- Mechanical resistance RMS 0.7N·s/m
Dimensions
- Nominal diameter 10″
- 257mm
- Overall diameter 257mm
- Baffle cutout diameter 232mm
- Overall depth 114mm
- Flange thickness 9mm
- Mounting depth 105mm
- Volume occupied by the driver (estimated) 1.2L
- Net weight 2.66kg
- Frame material Stamped Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)