PRV Audio 4MR60-4
4Ω
Full-range
Nominal diameter | 4″ / 102 mm |
Resonance | 89.9 Hz |
Q factor | 0.68 |
Sensitivity | 86.9 dB |
Linear excursion | ± 2.9 mm |
Program Power | 60 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.9dB
- Frequency response 90 - 15000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 89.9Hz
- Mechanical quality factor QMS 7.34
- Electrical quality factor QES 0.75
- Total quality factor QTS 0.68
Large signal parameters
- Maximum linear excursion xmax 2.9mm
- Air volume displaced at xmax VD 16cm³
- Power handling P 30W
- Program power Pmax 60W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.6Ω
- Inductance (1kHz) LE 0.2mH
- VC Diameter 20mm
- Winding height HVC 7.5mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 3.42N/A
- Motor constant Bl/√RE 1.8N/√W
- Air gap height HAG 3.5mm
Diaphragm
- Effective diameter 85mm
- Effective area SD 57cm²
- Moving mass MMS 4.32g
- Moving mass (without air load) MMD 4g
Suspensions
- Stiffness KMS 1.38N/mm
- Compliance CMS 725µm/N
- Equivalent volume to the compliance VAS 3.26L
- Mechanical resistance RMS 0.33N·s/m
Dimensions
- Nominal diameter 4″
- 102mm
- Overall diameter 126mm
- Baffle cutout diameter 102mm
- Overall depth 60mm
- Flange thickness 4mm
- Mounting depth 56mm
- Volume occupied by the driver (estimated) 0.18L
- Net weight 0.52kg
- Frame material Stamped Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





