PRV Audio 5MR450-NDY
4Ω
8Ω
Mid-range
Nominal diameter | 5″ / 127 mm |
Resonance | 159 Hz |
Q factor | 0.64 |
Sensitivity | 92.1 dB |
Linear excursion | ± 3.5 mm |
Program Power | 450 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.1dB
- Frequency response 160 - 16000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 159Hz
- Mechanical quality factor QMS 22.26
- Electrical quality factor QES 0.66
- Total quality factor QTS 0.64
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Air volume displaced at xmax VD 33cm³
- Power handling P 225W
- Program power Pmax 450W
- Peak power Ppeak 900W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.9Ω
- Inductance (1kHz) LE 0.03mH
- VC Diameter 38.1mm
- Winding height HVC 9.8mm
- Winding material Copper
- Former material Kapton
Magnet
- Force factor Bl 9.42N/A
- Motor constant Bl/√RE 3.59N/√W
- Air gap height HAG 5.8mm
Diaphragm
- Effective diameter 110mm
- Effective area SD 95cm²
- Moving mass MMS 8.6g
- Moving mass (without air load) MMD 7.9g
Suspensions
- Stiffness KMS 8.62N/mm
- Compliance CMS 116µm/N
- Equivalent volume to the compliance VAS 1.47L
- Mechanical resistance RMS 0.39N·s/m
Dimensions
- Nominal diameter 5″
- 127mm
- Overall diameter 147mm
- Baffle cutout diameter 120mm
- Overall depth 75mm
- Flange thickness 9mm
- Mounting depth 66mm
- Volume occupied by the driver (estimated) 0.38L
- Net weight 1.2kg
- Frame material Die Cast Aluminium
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





