LaVoce MAN061.80
8Ω
Mid-range
Nominal diameter | 6.5″ / 165 mm |
Resonance | 172 Hz |
Q factor | 0.57 |
Sensitivity | 93.4 dB |
Linear excursion | ± 3 mm |
Program Power | 300 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.4dB
- Frequency response 170 - 6000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 172Hz
- Mechanical quality factor QMS 4.69
- Electrical quality factor QES 0.65
- Total quality factor QTS 0.57
Large signal parameters
- Maximum linear excursion xmax 3mm
- Maximum excursion before damage xlim 5.5mm
- Air volume displaced at xmax VD 40cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.6Ω
- Inductance (1kHz) LE 0.09mH
- VC Diameter 45mm
- Winding height HVC 9.1mm
- Winding material Copper Clad Aluminium
- Former material Glass Fiber
Magnet
- Force factor Bl 11N/A
- Motor constant Bl/√RE 4.68N/√W
- Air gap height HAG 6mm
- Diameter 85mm
- Height 7mm
- Material Neodymium
Diaphragm
- Effective diameter 130mm
- Effective area SD 132cm²
- Moving mass MMS 13.3g
- Moving mass (without air load) MMD 12.1g
- Material Water Resistant Treated Paper + Water Proof Front Side Treatment
Suspensions
- Stiffness KMS 15.4N/mm
- Compliance CMS 65µm/N
- Equivalent volume to the compliance VAS 1.59L
- Mechanical resistance RMS 3.06N·s/m
- Surround material Polycotton
Dimensions
- Nominal diameter 6.5″
- 165mm
- Volume occupied by the driver 0.4L
- Net weight 1.1kg
- Frame material Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





