PRV Audio 6MB100-4
4Ω
Mid Bass
Nominal diameter | 6.5″ / 165 mm |
Resonance | 93.2 Hz |
Q factor | 1.10 |
Sensitivity | 89.8 dB |
Linear excursion | ± 2.8 mm |
Program Power | 100 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.8dB
- Frequency response 90 - 10000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 93.2Hz
- Mechanical quality factor QMS 5.75
- Electrical quality factor QES 1.37
- Total quality factor QTS 1.10
Large signal parameters
- Maximum linear excursion xmax 2.8mm
- Air volume displaced at xmax VD 39cm³
- Power handling P 50W
- Program power Pmax 100W
- Peak power Ppeak 200W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.8Ω
- Inductance (1kHz) LE 0.22mH
- VC Diameter 38mm
- Winding height HVC 8mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 4.33N/A
- Motor constant Bl/√RE 2.22N/√W
- Air gap height HAG 5mm
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 11.5g
- Moving mass (without air load) MMD 10.3g
Suspensions
- Stiffness KMS 3.97N/mm
- Compliance CMS 252µm/N
- Equivalent volume to the compliance VAS 7.22L
- Mechanical resistance RMS 1.17N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 166mm
- Baffle cutout diameter 142mm
- Overall depth 65mm
- Flange thickness 6mm
- Mounting depth 59mm
- Volume occupied by the driver (estimated) 0.33L
- Net weight 0.95kg
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





