PRV Audio 6MB200-4
4Ω
8ΩMid Bass
| Nominal diameter | 6″ / 166 mm |
| Resonance | 115 Hz |
| Q factor | 0.83 |
| Sensitivity | 91.8 dB |
| Linear excursion | ± 4.9 mm |
| Program Power | 200 W |
Discontinued
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 91.8dB
- Frequency response 125 - 4500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 115Hz
- Mechanical quality factor QMS 24.30
- Electrical quality factor QES 0.86
- Total quality factor QTS 0.83
Large signal parameters
- Maximum linear excursion xmax 4.9mm
- Air volume displaced at xmax VD 75cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.7Ω
- Inductance (1kHz) LE 0.43mH
- VC Diameter 38.1mm
- Winding height HVC 12.5mm
- Winding material Copper
- Former material Kapton
Magnet
- Force factor Bl 6.18N/A
- Motor constant Bl/√RE 3.21N/√W
- Air gap height HAG 5.5mm
- Material Ferrite
Diaphragm
- Effective diameter 140mm
- Effective area SD 154cm²
- Moving mass MMS 12.4g
- Moving mass (without air load) MMD 11.1g
Suspensions
- Stiffness KMS 6.45N/mm
- Compliance CMS 155µm/N
- Equivalent volume to the compliance VAS 5.15L
- Mechanical resistance RMS 0.37N·s/m
Dimensions
- Nominal diameter 6″
- 166mm
- Overall diameter 166mm
- Baffle cutout diameter 143mm
- Overall depth 74mm
- Flange thickness 8mm
- Mounting depth 66mm
- Volume occupied by the driver (estimated) 0.48L
- Net weight 1.51kg
- Frame material Stamped Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.png.webp)
.jpg.webp)
.jpg.webp)