PRV Audio 6MB200-4 v2
4Ω
8ΩMid Bass
Nominal diameter | 6″ / 152 mm |
Resonance | 124 Hz |
Q factor | 0.97 |
Sensitivity | 92 dB |
Linear excursion | ± 4.8 mm |
Program Power | 200 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92dB
- Frequency response 125 - 6500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 124Hz
- Mechanical quality factor QMS 20.84
- Electrical quality factor QES 1.02
- Total quality factor QTS 0.97
Large signal parameters
- Maximum linear excursion xmax 4.8mm
- Air volume displaced at xmax VD 74cm³
- Power handling P 100W
- Program power Pmax 200W
- Peak power Ppeak 400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.7Ω
- Inductance (1kHz) LE 0.18mH
- VC Diameter 38mm
- Winding height HVC 12.5mm
- Winding material Copper
- Former material Kapton
Magnet
- Force factor Bl 5.79N/A
- Motor constant Bl/√RE 3.01N/√W
- Air gap height HAG 5.8mm
Diaphragm
- Effective diameter 140mm
- Effective area SD 154cm²
- Moving mass MMS 11.9g
- Moving mass (without air load) MMD 10.5g
Suspensions
- Stiffness KMS 7.19N/mm
- Compliance CMS 139µm/N
- Equivalent volume to the compliance VAS 3.97L
- Mechanical resistance RMS 0.44N·s/m
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 166mm
- Baffle cutout diameter 143mm
- Overall depth 74mm
- Flange thickness 8mm
- Mounting depth 66mm
- Volume occupied by the driver (estimated) 0.48L
- Net weight 1.5kg
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





