PRV Audio 6MR400CF-4
4Ω
Mid-range
Nominal diameter | 6.5″ / 165 mm |
Resonance | 131 Hz |
Q factor | 0.76 |
Sensitivity | 92.6 dB |
Linear excursion | ± 3.5 mm |
Program Power | 400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.6dB
- Frequency response 120 - 12000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 131Hz
- Mechanical quality factor QMS 26.61
- Electrical quality factor QES 0.78
- Total quality factor QTS 0.76
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Air volume displaced at xmax VD 53cm³
- Power handling P 200W
- Program power Pmax 400W
- Peak power Ppeak 800W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz) LE 0.151mH
- VC Diameter 38mm
- Winding height HVC 10mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 6.32N/A
- Motor constant Bl/√RE 3.43N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 138mm
- Effective area SD 150cm²
- Moving mass MMS 11.2g
- Moving mass (without air load) MMD 9.9g
Suspensions
- Stiffness KMS 7.58N/mm
- Compliance CMS 132µm/N
- Equivalent volume to the compliance VAS 4.11L
- Mechanical resistance RMS 0.35N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 166mm
- Baffle cutout diameter 145mm
- Overall depth 80mm
- Flange thickness 10mm
- Mounting depth 70mm
- Volume occupied by the driver (estimated) 0.58L
- Net weight 1.9kg
- Frame material Stamped steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





