PRV Audio 6MR200A-4
4Ω
8ΩMid-range
Nominal diameter | 6.5″ / 165 mm |
Resonance | 138 Hz |
Q factor | 0.97 |
Sensitivity | 92.5 dB |
Linear excursion | ± 2.6 mm |
Program Power | 200 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.5dB
- Frequency response 155 - 11000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 138Hz
- Mechanical quality factor QMS 9.47
- Electrical quality factor QES 1.08
- Total quality factor QTS 0.97
Large signal parameters
- Maximum linear excursion xmax 2.6mm
- Air volume displaced at xmax VD 36cm³
- Power handling P 100W
- Program power Pmax 200W
- Peak power Ppeak 400W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.4Ω
- Inductance (1kHz) LE 0.18mH
- VC Diameter 38mm
- Winding height HVC 8mm
- Winding material Copper
- Former material Kapton
Magnet
- Force factor Bl 4.92N/A
- Motor constant Bl/√RE 2.67N/√W
- Air gap height HAG 5.5mm
Diaphragm
- Effective diameter 132mm
- Effective area SD 137cm²
- Moving mass MMS 8.89g
- Moving mass (without air load) MMD 7.7g
Suspensions
- Stiffness KMS 6.71N/mm
- Compliance CMS 149µm/N
- Equivalent volume to the compliance VAS 3.89L
- Mechanical resistance RMS 0.82N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 168mm
- Baffle cutout diameter 145mm
- Overall depth 64mm
- Flange thickness 7mm
- Mounting depth 57mm
- Volume occupied by the driver (estimated) 0.45L
- Net weight 1.6kg
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





