PRV Audio 6MR250B-4 SLIM
4Ω
Mid-range
Nominal diameter | 6″ / 152 mm |
Resonance | 143 Hz |
Q factor | 0.82 |
Sensitivity | 93.5 dB |
Linear excursion | ± 3.3 mm |
Program Power | 250 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.5dB
- Frequency response 145 - 8000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 143Hz
- Mechanical quality factor QMS 28.73
- Electrical quality factor QES 0.85
- Total quality factor QTS 0.82
Large signal parameters
- Maximum linear excursion xmax 3.3mm
- Air volume displaced at xmax VD 47cm³
- Power handling P 125W
- Program power Pmax 250W
- Peak power Ppeak 500W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.6Ω
- Inductance (1kHz) LE 0.135mH
- VC Diameter 38mm
- Winding height HVC 9.5mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 5.82N/A
- Motor constant Bl/√RE 3.07N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 8.89g
- Moving mass (without air load) MMD 7.7g
Suspensions
- Stiffness KMS 7.19N/mm
- Compliance CMS 139µm/N
- Equivalent volume to the compliance VAS 4L
- Mechanical resistance RMS 0.28N·s/m
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 165mm
- Baffle cutout diameter 144mm
- Overall depth 61mm
- Flange thickness 6mm
- Mounting depth 55mm
- Volume occupied by the driver (estimated) 0.44L
- Net weight 1.6kg
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





