PRV Audio 6MR400-4 BULLET
4Ω
Mid-range
Nominal diameter | 6.5″ / 152 mm |
Resonance | 144 Hz |
Q factor | 0.60 |
Sensitivity | 95.5 dB |
Linear excursion | ± 3.3 mm |
Program Power | 400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.5dB
- Frequency response 145 - 12500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 144Hz
- Mechanical quality factor QMS 11.98
- Electrical quality factor QES 0.64
- Total quality factor QTS 0.60
Large signal parameters
- Maximum linear excursion xmax 3.3mm
- Air volume displaced at xmax VD 47cm³
- Power handling P 200W
- Program power Pmax 400W
- Peak power Ppeak 800W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.6Ω
- Inductance (1kHz) LE 0.136mH
- VC Diameter 38mm
- Winding height HVC 9.5mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 6.37N/A
- Motor constant Bl/√RE 3.36N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 7.94g
- Moving mass (without air load) MMD 6.7g
Suspensions
- Stiffness KMS 6.49N/mm
- Compliance CMS 154µm/N
- Equivalent volume to the compliance VAS 4.4L
- Mechanical resistance RMS 0.6N·s/m
Dimensions
- Nominal diameter 6.5″
- 152mm
- Overall diameter 168mm
- Baffle cutout diameter 144mm
- Overall depth 74mm
- Flange thickness 7mm
- Mounting depth 67mm
- Volume occupied by the driver (estimated) 0.61L
- Net weight 2.18kg
- Frame material Stamped Steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





