PRV Audio 6MR200A
4Ω
8Ω
Mid-range
| Nominal diameter | 6″ / 152 mm |
| Resonance | 114 Hz |
| Q factor | 1.17 |
| Sensitivity | 92.6 dB |
| Linear excursion | ± 2.6 mm |
| Program Power | 200 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 92.6dB
- Frequency response 155 - 11000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 114Hz
- Mechanical quality factor QMS 13.16
- Electrical quality factor QES 1.28
- Total quality factor QTS 1.17
Large signal parameters
- Maximum linear excursion xmax 2.6mm
- Air volume displaced at xmax VD 36cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 0.26mH
- VC Diameter 38mm
- Winding height HVC 8mm
- Winding material Copper
- Former material Kapton
Magnet
- Force factor Bl 6.27N/A
- Motor constant Bl/√RE 2.67N/√W
- Air gap height HAG 5.5mm
Diaphragm
- Effective diameter 132mm
- Effective area SD 137cm²
- Moving mass MMS 10.1g
- Moving mass (without air load) MMD 8.9g
Suspensions
- Stiffness KMS 8.33N/mm
- Compliance CMS 120µm/N
- Equivalent volume to the compliance VAS 3.16L
- Mechanical resistance RMS 0.55N·s/m
Dimensions
- Nominal diameter 6″
- 152mm
- Overall diameter 168mm
- Baffle cutout diameter 145mm
- Overall depth 64mm
- Flange thickness 7mm
- Mounting depth 57mm
- Volume occupied by the driver (estimated) 0.45L
- Net weight 1.6kg
- Frame material Stamped Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)