PRV Audio 6MR400-NDY-4 BULLET
4Ω
Mid-range
Nominal diameter | 6.5″ / 165 mm |
Resonance | 178 Hz |
Q factor | 0.87 |
Sensitivity | 93.8 dB |
Linear excursion | ± 3.3 mm |
Program Power | 400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.8dB
- Frequency response 145 - 14000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 178Hz
- Mechanical quality factor QMS 10.60
- Electrical quality factor QES 0.94
- Total quality factor QTS 0.87
Large signal parameters
- Maximum linear excursion xmax 3.3mm
- Air volume displaced at xmax VD 47cm³
- Power handling P 200W
- Program power Pmax 400W
- Peak power Ppeak 800W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.3Ω
- Inductance (1kHz) LE 0.13mH
- VC Diameter 38mm
- Winding height HVC 9mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 6.04N/A
- Motor constant Bl/√RE 3.32N/√W
- Air gap height HAG 5mm
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 9.31g
- Moving mass (without air load) MMD 8.1g
Suspensions
- Stiffness KMS 11.8N/mm
- Compliance CMS 85µm/N
- Equivalent volume to the compliance VAS 2.44L
- Mechanical resistance RMS 0.98N·s/m
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 166mm
- Baffle cutout diameter 145mm
- Overall depth 78mm
- Flange thickness 10mm
- Mounting depth 68mm
- Volume occupied by the driver (estimated) 0.3L
- Net weight 0.7kg
- Frame material Stamped steel
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





