PRV Audio 8MR500-NDY-4 v2
4Ω
Mid-range
Nominal diameter | 8″ / 203 mm |
Resonance | 80.8 Hz |
Q factor | 0.44 |
Sensitivity | 93.4 dB |
Linear excursion | ± 3.5 mm |
Program Power | 500 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 93.4dB
- Frequency response 90 - 9000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 80.8Hz
- Mechanical quality factor QMS 5.18
- Electrical quality factor QES 0.48
- Total quality factor QTS 0.44
Large signal parameters
- Maximum linear excursion xmax 3.5mm
- Air volume displaced at xmax VD 84cm³
- Power handling P 250W
- Program power Pmax 500W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.7Ω
- Inductance (1kHz) LE 0.35mH
- VC Diameter 51mm
- Winding height HVC 11mm
- Winding material Copper Clad Aluminium
- Former material Kapton
Magnet
- Force factor Bl 9.16N/A
- Motor constant Bl/√RE 4.76N/√W
- Air gap height HAG 8mm
Diaphragm
- Effective diameter 175mm
- Effective area SD 241cm²
- Moving mass MMS 21.7g
- Moving mass (without air load) MMD 19.1g
Suspensions
- Stiffness KMS 5.59N/mm
- Compliance CMS 179µm/N
- Equivalent volume to the compliance VAS 14.5L
- Mechanical resistance RMS 2.12N·s/m
Dimensions
- Nominal diameter 8″
- 203mm
- Overall diameter 206mm
- Baffle cutout diameter 187mm
- Overall depth 85mm
- Flange thickness 8mm
- Mounting depth 77mm
- Volume occupied by the driver (estimated) 0.49L
- Net weight 1.1kg
- Frame material Stamped Steel
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





