PUNKTKILDE AUGSL0002-JN01
Subwoofer
10″ / 254 mm
Nominal diameter
25 Hz
Resonance
0.3
Q factor
87 dB
Sensitivity
± 12.9 mm
Linear excursion
350 W
Program Power
![PUNKTKILDE AUGSL0002-JN01 Subwoofer](/PUNKTKILDE/AUGSL0002-JN01/PUNKTKILDE_AUGSL0002-JN01_(Photo_1).jpg)
![PUNKTKILDE AUGSL0002-JN01 Subwoofer](/PUNKTKILDE/AUGSL0002-JN01/PUNKTKILDE_AUGSL0002-JN01_(Photo_2).jpg)
![PUNKTKILDE AUGSL0002-JN01 Subwoofer](/PUNKTKILDE/AUGSL0002-JN01/PUNKTKILDE_AUGSL0002-JN01_(Photo_3).jpg)
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 86.5
- dB
- Resonance frequency (free air)
- fS
- 24.5
- Hz
- Mechanical quality factor
- QMS
- 13.65
- Electrical quality factor
- QES
- 0.30
- Total quality factor
- QTS
- 0.30
- Maximum linear excursion
- xmax
- 12.9
- mm
- Maximum excursion before damage
- xlim
- 29.0
- mm
- Air volume displaced at xmax
- VD
- 468
- cm³
- Power handling
- P
- 250
- W
- Program power
- Pmax
- 350
- W
- Nominal impedance
- Z
- 4
- Ω
- DC resistance
- RE
- 2.8
- Ω
- Inductance (1kHz)
- LE
- 0.94
- mH
- VC Diameter
- 50
- mm
- Winding height
- HVC
- 33.8
- mm
- Winding material
- 1-APP7CAW
- Former material
- GFB-P
- Force factor
- Bl
- 13.49
- N/A
- Motor constant
- Bl/√RE
- 8.09
- N/√W
- Air gap height
- HAG
- 8
- mm
- Material
- Ferrite
- Effective diameter
- 215
- mm
- Effective area
- SD
- 363
- cm²
- Moving mass
- MMS
- 129
- g
- Moving mass (without air load)
- MMD
- 124.2
- g
- Material
- Mica
- Stiffness
- KMS
- 3.07
- N/mm
- Compliance
- CMS
- 326
- µm/N
- Equivalent volume to the compliance
- VAS
- 60.9
- L
- Mechanical resistance
- RMS
- 1.457
- N·s/m
- Surround material
- Rubber
- Nominal diameter
- 10
- ″
- 254
- mm
- Volume occupied by the driver (estimated)
- 3.0
- L
- Net weight
- 6.85
- kg
- Frame material
- Aluminium Die-cast
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![PUNKTKILDE AUGSL0002-JN01 SPL & Impedance](/PUNKTKILDE/AUGSL0002-JN01/PUNKTKILDE_AUGSL0002-JN01_(Frequency_response_+_Impedance).png)
![PUNKTKILDE AUGSL0002-JN01 Dimensions](/PUNKTKILDE/AUGSL0002-JN01/PUNKTKILDE_AUGSL0002-JN01_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)