PUNKTKILDE AUGWL0065-JN03
Woofer
2.5″ / 64 mm
Nominal diameter
151 Hz
Resonance
0.68
Q factor
85 dB
Sensitivity
± 1.1 mm
Linear excursion
10 W
Program Power
![PUNKTKILDE AUGWL0065-JN03 Woofer](/PUNKTKILDE/AUGWL0065-JN03/PUNKTKILDE_AUGWL0065-JN03_(Photo_1).jpg)
![PUNKTKILDE AUGWL0065-JN03 Woofer](/PUNKTKILDE/AUGWL0065-JN03/PUNKTKILDE_AUGWL0065-JN03_(Photo_2).jpg)
![PUNKTKILDE AUGWL0065-JN03 Woofer](/PUNKTKILDE/AUGWL0065-JN03/PUNKTKILDE_AUGWL0065-JN03_(Photo_3).jpg)
- Sensitivity (1W, 1m, infinite baffle)
- SPL1W
- 85.0
- dB
- Resonance frequency (free air)
- fS
- 151
- Hz
- Mechanical quality factor
- QMS
- 5.61
- Electrical quality factor
- QES
- 0.77
- Total quality factor
- QTS
- 0.68
- Maximum linear excursion
- xmax
- 1.1
- mm
- Maximum excursion before damage
- xlim
- 4.0
- mm
- Air volume displaced at xmax
- VD
- 3.5
- cm³
- Power handling
- P
- 5
- W
- Program power
- Pmax
- 10
- W
- Nominal impedance
- Z
- 8
- Ω
- DC resistance
- RE
- 6.8
- Ω
- Inductance (1kHz)
- LE
- 0.41
- mH
- VC Diameter
- 25
- mm
- Winding height
- HVC
- 6.3
- mm
- Winding material
- Copper Clad Aluminium
- Former material
- Aluminum
- Force factor
- Bl
- 5.49
- N/A
- Motor constant
- Bl/√RE
- 2.1
- N/√W
- Air gap height
- HAG
- 4
- mm
- Material
- Neodymium
- Effective diameter
- 64
- mm
- Effective area
- SD
- 32
- cm²
- Moving mass
- MMS
- 3.6
- g
- Moving mass (without air load)
- MMD
- 3.5
- g
- Material
- Ultra-Thin Carbon
- Stiffness
- KMS
- 3.24
- N/mm
- Compliance
- CMS
- 309
- µm/N
- Equivalent volume to the compliance
- VAS
- 0.452
- L
- Mechanical resistance
- RMS
- 0.61
- N·s/m
- Nominal diameter
- 2.5
- ″
- 64
- mm
- Net weight
- 0.116
- kg
- Frame material
- Plastic
Thiele & Small parameters
Large signal parameters
Voice Coil
Magnet
Diaphragm
Suspensions
Dimensions
![PUNKTKILDE AUGWL0065-JN03 SPL & Impedance](/PUNKTKILDE/AUGWL0065-JN03/PUNKTKILDE_AUGWL0065-JN03_(Frequency_response_+_Impedance).png)
![PUNKTKILDE AUGWL0065-JN03 Dimensions](/PUNKTKILDE/AUGWL0065-JN03/PUNKTKILDE_AUGWL0065-JN03_(Dimensions).png)
Export this driver to a simulation software:
![WinISD](/images/export/WinISD.png)
![Basta!](/images/export/Basta.png)
![Hornresp](/images/export/Hornresp.png)
![QSpeakers](/images/export/QSpeakers.png)
![SpeakerSim](/images/export/SpeakerSim.png)
![MfbLabs](/images/export/MfbLabs.png)
![Speakerbench](/images/export/Speakerbench.png)