Peerless XLS-P830452
4Ω
Subwoofer
| Nominal diameter | 10″ / 254 mm |
| Resonance | 25 Hz |
| Q factor | 0.29 |
| Sensitivity | 84.7 dB |
| Linear excursion | ± 15.2 mm |
| Program power | 300 W |
Discontinued
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 84.7dB
- Frequency response 20 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 25Hz
- Mechanical quality factor QMS 4.14
- Electrical quality factor QES 0.31
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion (one way) xmax 15.2mm
- Air volume displaced at xmax VD 532cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 4.2Ω
- Inductance (1kHz) LE 1.7mH
- VC Diameter 51.3mm
- Former material Aluminium
Magnet
- Force factor Bl 15.7N/A
- Motor constant Bl/√RE 7.66N/√W
- Air gap height HAG 8mm
- Material Ferrite
Diaphragm
- Effective diameter 211mm
- Effective area SD 350cm²
- Moving mass (including air load) MMS 120g
- Moving mass MMD 138g
Suspensions
- Stiffness KMS 2.89N/mm
- Compliance CMS 350µm/N
- Equivalent volume to the compliance VAS 60.3L
- Mechanical resistance RMS 5.54N·s/m
Dimensions
- Nominal diameter 10″
- 254mm
- Volume occupied by the driver (estimated) 2.6L
- Net weight 5.91kg
- Frame material Cast Aluminium
.png)
.png)
Export this driver to a box design software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.png.webp)
.jpg.webp)
.png.webp)