Precision Devices PDN.10MH25
8Ω
Woofer
| Nominal diameter | 10″ / 250 mm |
| Resonance | 73.7 Hz |
| Q factor | 0.23 |
| Sensitivity | 98.4 dB |
| Linear excursion | ± 2.6 mm |
| Program Power | 600 W |
Discontinued
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 98.4dB
- Frequency response 80 - 5000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 73.7Hz
- Mechanical quality factor QMS 7.70
- Electrical quality factor QES 0.24
- Total quality factor QTS 0.23
Large signal parameters
- Maximum linear excursion xmax 2.6mm
- Air volume displaced at xmax VD 94cm³
- Power handling P 300W
- Program power Pmax 600W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.2Ω
- Inductance (1kHz) LE 0.39mH
- VC Diameter 63mm
- Winding height HVC 11mm
- Winding material Copper
- Former material Glass Fibre
Magnet
- Flux density B 1.67T
- Force factor Bl 21N/A
- Motor constant Bl/√RE 8.43N/√W
- Air gap height HAG 8mm
- Material Neodymium
Diaphragm
- Effective diameter 215mm
- Effective area SD 363cm²
- Moving mass MMS 36.4g
- Moving mass (without air load) MMD 31.1g
- Material Paper
Suspensions
- Stiffness KMS 7.81N/mm
- Compliance CMS 128µm/N
- Equivalent volume to the compliance VAS 23.7L
- Mechanical resistance RMS 2.19N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 285mm
- Baffle cutout diameter 227mm
- Overall depth 100mm
- Flange thickness 7mm
- Mounting depth 93mm
- Volume occupied by the driver (estimated) 1.3L
- Net weight 3.26kg
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)