Pride M6.10 D2
1Ω
2x2Ω
Subwoofer
| Nominal diameter | 10″ / 265 mm |
| Resonance | 36.1 Hz |
| Q factor | 0.52 |
| Sensitivity | 83.9 dB |
| Linear excursion | ± 15 mm |
| Program Power | 1200 W |
.jpg)
.jpg)
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 83.9dB
Thiele & Small parameters
- Resonance frequency (free air) fS 36.1Hz
- Mechanical quality factor QMS 5.10
- Electrical quality factor QES 0.58
- Total quality factor QTS 0.52
Large signal parameters
- Maximum linear excursion xmax 15mm
- Air volume displaced at xmax VD 506cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 3.0Ω
- Inductance (1kHz, in series, estimated) LE 1.97mH
- VC Diameter 50.8mm
- Winding material round copper
Magnet
- Force factor (in series) Bl 13.8N/A
- Motor constant Bl/√RE 7.97N/√W
- Diameter 140mm
- Height 40mm
Diaphragm
- Effective diameter 207mm
- Effective area SD 337cm²
- Moving mass MMS 163g
- Moving mass (without air load) MMD 158g
- Material Paper with glass fiber
Suspensions
- Stiffness KMS 8.7N/mm
- Compliance CMS 115µm/N
- Equivalent volume to the compliance VAS 18.5L
- Mechanical resistance RMS 7.25N·s/m
Dimensions
- Nominal diameter 10″
- 265mm
- Overall diameter 265mm
- Baffle cutout diameter 231mm
- Mounting depth 131mm
- Volume occupied by the driver 1.5L
- Net weight 5.3kg
- Frame material Steel
.jpg)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.png.webp)
.png.webp)