SB Acoustics Satori MR16TX-8

• Sensitivity (1W, 1m, infinite baffle) SPL1W 89.5dB

Thiele & Small parameters

• Resonance frequency (free air) fS 35Hz
• Mechanical quality factor QMS 6.47
• Electrical quality factor QES 0.32
• Total quality factor QTS 0.31

Large signal parameters

• Maximum linear excursion xmax 2.9mm
• Air volume displaced at xmax VD 33cm³
• Power handling P 30W
• Program power Pmax 60W

Voice Coil

• Nominal impedance Z 8Ω
• DC resistance RE 6.2Ω
• Inductance (1kHz) LE 0.11mH
• VC Diameter 35.5mm
• Winding height HVC 10.7mm
• Winding material Copper Clad Aluminium
• Former material Glass Fiber

Magnet

• Flux density B 1.17T
• Force factor Bl 6.6N/A
• Motor constant Bl/√RE 2.65N/√W
• Air gap height HAG 5mm
• Weight 0.13kg
• Material Neodymium

Diaphragm

• Effective diameter 122mm
• Effective area SD 117cm²
• Moving mass MMS 10.3g
• Moving mass (without air load) MMD 9.3g
• Material TeXtreme®

Suspensions

• Stiffness KMS 0.5N/mm
• Compliance CMS 2000µm/N
• Equivalent volume to the compliance VAS 38.9L
• Mechanical resistance RMS 0.35N·s/m
• Surround material Rubber
• Spider material BIMAX

Dimensions

• Nominal diameter 6.5″
• 165mm
• Volume occupied by the driver (estimated) 0.4L
• Net weight 1.0kg
• Frame material Cast aluminium