SB Acoustics SB15NAC30-8

4Ω
8Ω

Mid Bass

Nominal diameter5″ / 127 mm
Resonance35.5 Hz
Q factor0.37
Sensitivity84.8 dB
Linear excursion± 5 mm
Program Power100 W
Discontinued
SB Acoustics SB15NAC30-8 Mid BassSB Acoustics SB15NAC30-8 Mid Bass
Impedance
Excursion
Velocity
SPL
Phase
Group delay
Step response
Tone Burst
Driver
Port
Combined
Frequency response
Hz
Impedance
Ω
Impedance Phase
°
Excursion
mm
Velocity
m/s
SPL
dB
Acoustical Phase
°
Group Delay
ms
Transient response
ms
Discard
Apply

Specifications

  • Sensitivity (1W, 1m, infinite baffle) SPL1W 84.8dB

Thiele & Small parameters

  • Resonance frequency (free air) fS 35.5Hz
  • Mechanical quality factor QMS 6.00
  • Electrical quality factor QES 0.39
  • Total quality factor QTS 0.37

Large signal parameters

  • Maximum linear excursion xmax 5mm
  • Air volume displaced at xmax VD 41cm³
  • Power handling P 50W
  • Program power Pmax 100W

Voice Coil

  • Nominal impedance Z 8Ω
  • DC resistance RE 5.7Ω
  • Inductance (1kHz) LE 0.14mH
  • VC Diameter 30.5mm
  • Winding height HVC 14mm

Magnet

  • Flux density B 1T
  • Force factor Bl 5.9N/A
  • Motor constant Bl/√RE 2.47N/√W
  • Air gap height HAG 5mm
  • Weight 0.54kg

Diaphragm

  • Effective diameter 102mm
  • Effective area SD 82cm²
  • Moving mass MMS 10.8g
  • Moving mass (without air load) MMD 10.3g

Suspensions

  • Stiffness KMS 0.538N/mm
  • Compliance CMS 1860µm/N
  • Equivalent volume to the compliance VAS 17.7L
  • Mechanical resistance RMS 0.4N·s/m

Dimensions

  • Nominal diameter 5″
  • 127mm
  • Volume occupied by the driver (estimated) 0.59L
  • Net weight 1.46kg
SPL & Impedance
SB Acoustics SB15NAC30-8 SPL & Impedance
SB Acoustics SB15NAC30-8 Dimensions
PDF fileDatasheet

Export this driver to a simulation software:

Closed Box Simulator·Speakerbench logoSpeakerbenchWinISD logoWinISDBasta! logoBasta!Hornresp logoHornrespQSpeakers logoQSpeakersSpeakerSim logoSpeakerSimMfbLabs logoMfbLabs

Similar speaker drivers to SB Acoustics SB15NAC30-8