SICA 12 SR 3 CP
8Ω
Subwoofer
Nominal diameter | 12″ / 321 mm |
Resonance | 37 Hz |
Q factor | 0.40 |
Sensitivity | 89.8 dB |
Linear excursion | ± 8 mm |
Program Power | 900 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.8dB
- Frequency response 35 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 37Hz
- Mechanical quality factor QMS 2.96
- Electrical quality factor QES 0.46
- Total quality factor QTS 0.40
Large signal parameters
- Maximum linear excursion xmax 8mm
- Air volume displaced at xmax VD 393cm³
- Power handling P 450W
- Program power Pmax 900W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 1.29mH
- VC Diameter 75mm
- Winding height HVC 10mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Flux density B 1T
- Force factor Bl 16.6N/A
- Motor constant Bl/√RE 7.27N/√W
- Weight 1.79kg
- Material Ferrite
Diaphragm
- Effective diameter 250mm
- Effective area SD 491cm²
- Moving mass MMS 104g
- Moving mass (without air load) MMD 95.9g
- Material Paper
Suspensions
- Stiffness KMS 5.62N/mm
- Compliance CMS 178µm/N
- Equivalent volume to the compliance VAS 60.9L
- Mechanical resistance RMS 8.17N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 12″
- 321mm
- Overall diameter 320mm
- Baffle cutout diameter 284mm
- Overall depth 141mm
- Volume occupied by the driver (estimated) 2.9L
- Net weight 6.7kg
- Frame material Aluminium Die-Cast
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





