SICA 12 SR 3 PL
8Ω
Subwoofer
Nominal diameter | 12″ / 320 mm |
Resonance | 36 Hz |
Q factor | 0.42 |
Sensitivity | 89.7 dB |
Linear excursion | ± 7 mm |
Program Power | 800 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.7dB
- Frequency response 35 - 2000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 5.90
- Electrical quality factor QES 0.45
- Total quality factor QTS 0.42
Large signal parameters
- Maximum linear excursion xmax 7mm
- Air volume displaced at xmax VD 344cm³
- Power handling P 400W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 1.15mH
- VC Diameter 75mm
- Winding height HVC 10mm
- Winding material Copper
- Former material Glass Fiber
Magnet
- Flux density B 1.19T
- Force factor Bl 17N/A
- Motor constant Bl/√RE 7.39N/√W
- Weight 0.36kg
- Material Neodymium
Diaphragm
- Effective diameter 250mm
- Effective area SD 491cm²
- Moving mass MMS 109g
- Moving mass (without air load) MMD 100g
- Material Paper
Suspensions
- Stiffness KMS 5.65N/mm
- Compliance CMS 177µm/N
- Equivalent volume to the compliance VAS 60.4L
- Mechanical resistance RMS 4.16N·s/m
- Surround material Rubber
Dimensions
- Nominal diameter 12″
- 320mm
- Overall diameter 320mm
- Baffle cutout diameter 284mm
- Overall depth 143mm
- Volume occupied by the driver (estimated) 1.9L
- Net weight 3.5kg
- Frame material Aluminium Die-Cast
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





