Ciare HSB322
2x2Ω
2x4Ω
Subwoofer
Nominal diameter | 12″ / 320 mm |
Resonance | 36 Hz |
Q factor | 0.37 |
Sensitivity | 90.9 dB |
Linear excursion | ± 7.5 mm |
Program Power | 800 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 90.9dB
Thiele & Small parameters
- Resonance frequency (free air) fS 36Hz
- Mechanical quality factor QMS 3.89
- Electrical quality factor QES 0.40
- Total quality factor QTS 0.37
Large signal parameters
- Maximum linear excursion xmax 7.5mm
- Air volume displaced at xmax VD 383cm³
- Power handling P 350W
- Program power Pmax 800W
Voice Coil
- Nominal impedance Z 2 x 4Ω
- DC resistance (in series) RE 6.1Ω
- Inductance (1kHz, in series) LE 1.4mH
- VC Diameter 75mm
- Winding height HVC 20mm
- Former material Glass fiber
Magnet
- Force factor (in series) Bl 17N/A
- Motor constant Bl/√RE 6.88N/√W
- Air gap height HAG 10mm
Diaphragm
- Effective diameter 255mm
- Effective area SD 511cm²
- Moving mass MMS 90g
- Moving mass (without air load) MMD 81.6g
- Material Treated Cellulose
Suspensions
- Stiffness KMS 4.29N/mm
- Compliance CMS 233µm/N
- Equivalent volume to the compliance VAS 83L
- Mechanical resistance RMS 5.23N·s/m
- Surround material Rubber - Half Roll
- Spider material Nomex Fabric
Dimensions
- Nominal diameter 12″
- 320mm
- Overall diameter 315mm
- Baffle cutout diameter 282mm
- Overall depth 135mm
- Flange thickness 15mm
- Mounting depth 120mm
- Volume occupied by the driver (estimated) 2.9L
- Net weight 7.05kg
- Frame material Diecast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





