Skar Audio EVL-10 D2
2x2Ω
2x4ΩSubwoofer
Nominal diameter | 10″ / 277 mm |
Resonance | 44 Hz |
Q factor | 0.59 |
Sensitivity | 82 dB |
Linear excursion | ± 23.5 mm |
Program Power | 2000 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 82dB
Thiele & Small parameters
- Resonance frequency (free air) fS 44Hz
- Mechanical quality factor QMS 5.44
- Electrical quality factor QES 0.66
- Total quality factor QTS 0.59
Large signal parameters
- Maximum linear excursion xmax 23.5mm
- Air volume displaced at xmax VD 738cm³
- Power handling P 1000W
- Program power Pmax 2000W
Voice Coil
- Nominal impedance Z 2 x 2Ω
- DC resistance (in series) RE 4.0Ω
- Inductance (1kHz, in series, estimated) LE 3.58mH
- VC Diameter 76.2mm
- Winding material Copper-clad aluminium
Magnet
- Force factor (in series) Bl 20.9N/A
- Motor constant Bl/√RE 10.5N/√W
- Diameter 180mm
Diaphragm
- Effective diameter 200mm
- Effective area SD 314cm²
- Moving mass MMS 259g
- Moving mass (without air load) MMD 254g
- Material Pressed Paper
Suspensions
- Stiffness KMS 20.4N/mm
- Compliance CMS 49µm/N
- Equivalent volume to the compliance VAS 6.8L
- Mechanical resistance RMS 13.1N·s/m
- Surround material Foam
Dimensions
- Nominal diameter 10″
- 277mm
- Overall diameter 277mm
- Baffle cutout diameter 239mm
- Overall depth 210mm
- Flange thickness 28mm
- Mounting depth 182mm
- Volume occupied by the driver (estimated) 3.4L
Export this driver to a simulation software:
Closed Box Simulator·





