VOLT BM165.1
8Ω
Mid Bass
Nominal diameter | 6.5″ / 165 mm |
Resonance | 30 Hz |
Q factor | 0.24 |
Sensitivity | 87.4 dB |
Linear excursion | ± 6.3 mm |
Program Power | 200 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.4dB
- Frequency response 50 - 3000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 30Hz
- Mechanical quality factor QMS 4.12
- Electrical quality factor QES 0.26
- Total quality factor QTS 0.24
Large signal parameters
- Maximum linear excursion xmax 6.3mm
- Maximum excursion before damage xlim 12mm
- Air volume displaced at xmax VD 97cm³
- Power handling P 100W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.5Ω
- Inductance (1kHz) LE 1.2mH
- VC Diameter 38mm
- Winding material Copper
Magnet
- Force factor Bl 9.8N/A
- Motor constant Bl/√RE 4.18N/√W
- Weight 1.55kg
- Material Ferrite
Diaphragm
- Effective diameter 140mm
- Effective area SD 154cm²
- Moving mass MMS 25g
- Moving mass (without air load) MMD 23.5g
- Material Coated Black HIPS
Suspensions
- Stiffness KMS 0.813N/mm
- Compliance CMS 1230µm/N
- Equivalent volume to the compliance VAS 40.8L
- Mechanical resistance RMS 1.14N·s/m
- Surround material Low Loss Rubber
Dimensions
- Nominal diameter 6.5″
- 165mm
- Overall diameter 189mm
- Baffle cutout diameter 163mm
- Overall depth 90mm
- Flange thickness 6mm
- Mounting depth 84mm
- Volume occupied by the driver 0.7L
- Net weight 1.95kg
- Frame material Diecast Aluminium Vented
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





