VOLT SB2550
8Ω
Subwoofer
Nominal diameter | 10″ / 250 mm |
Resonance | 21 Hz |
Q factor | 0.29 |
Sensitivity | 86.3 dB |
Linear excursion | ± 11 mm |
Program Power | 400 W |
.jpg)
.jpg)
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 86.3dB
- Frequency response 18 - 500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 21Hz
- Mechanical quality factor QMS 1.90
- Electrical quality factor QES 0.34
- Total quality factor QTS 0.29
Large signal parameters
- Maximum linear excursion xmax 11mm
- Maximum excursion before damage xlim 18mm
- Air volume displaced at xmax VD 371cm³
- Power handling P 200W
- Program power Pmax 400W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.0Ω
- Inductance (1kHz) LE 1.46mH
- VC Diameter 50mm
- Winding height HVC 29mm
- Winding material Copper
Magnet
- Force factor Bl 14N/A
- Motor constant Bl/√RE 5.72N/√W
- Air gap height HAG 8mm
Diaphragm
- Effective diameter 207mm
- Effective area SD 337cm²
- Moving mass MMS 84.5g
- Moving mass (without air load) MMD 79.6g
Suspensions
- Stiffness KMS 1.45N/mm
- Compliance CMS 690µm/N
- Equivalent volume to the compliance VAS 111L
- Mechanical resistance RMS 5.82N·s/m
Dimensions
- Nominal diameter 10″
- 250mm
- Overall diameter 285mm
- Baffle cutout diameter 253mm
- Overall depth 132mm
- Flange thickness 9mm
- Mounting depth 123mm
- Volume occupied by the driver 1.2L
- Net weight 5.8kg
- Frame material Diecast Aluminium
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





