mivoc AWX184 MKII
4Ω
Woofer
Nominal diameter | 18″ / 46 mm |
Resonance | 32 Hz |
Q factor | 0.36 |
Sensitivity | 95.3 dB |
Linear excursion | ± 5.5 mm |
Program Power | 1200 W |
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 95.3dB
- Frequency response 28 - 500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 32Hz
- Mechanical quality factor QMS 6.10
- Electrical quality factor QES 0.38
- Total quality factor QTS 0.36
Large signal parameters
- Maximum linear excursion xmax 5.5mm
- Air volume displaced at xmax VD 678cm³
- Power handling P 600W
- Program power Pmax 1200W
Voice Coil
- Nominal impedance Z 4Ω
- DC resistance RE 3.5Ω
- Inductance (1kHz) LE 0.6mH
- VC Diameter 100mm
- Winding height HVC 21mm
Magnet
- Force factor Bl 18.5N/A
- Motor constant Bl/√RE 9.89N/√W
Diaphragm
- Effective diameter 396mm
- Effective area SD 1232cm²
- Moving mass MMS 188g
- Moving mass (without air load) MMD 158g
Suspensions
- Stiffness KMS 7.69N/mm
- Compliance CMS 130µm/N
- Equivalent volume to the compliance VAS 280L
- Mechanical resistance RMS 6.2N·s/m
Dimensions
- Nominal diameter 18″
- 46mm
- Overall diameter 459mm
- Baffle cutout diameter 420mm
- Overall depth 209mm
- Flange thickness 16mm
- Mounting depth 193mm
- Volume occupied by the driver (estimated) 6.7L
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





