mivoc XAW 180 HC
8Ω
Mid Bass
| Nominal diameter | 6.5″ / 17 mm |
| Resonance | 40 Hz |
| Q factor | 0.39 |
| Sensitivity | 87.1 dB |
| Linear excursion | ± 4.2 mm |
| Program Power | 200 W |
.png)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 87.1dB
- Frequency response 40 - 2500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 40Hz
- Mechanical quality factor QMS 3.80
- Electrical quality factor QES 0.43
- Total quality factor QTS 0.39
Large signal parameters
- Maximum linear excursion (one way) xmax 4.2mm
- Air volume displaced at xmax VD 56cm³
- Power handling P 80W
- Program power Pmax 200W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.7Ω
- Inductance (1kHz) LE 0.5mH
- VC Diameter 25mm
- Winding height HVC 14.4mm
Magnet
- Force factor Bl 7.5N/A
- Motor constant Bl/√RE 3.14N/√W
Diaphragm
- Effective diameter 131mm
- Effective area SD 134cm²
- Moving mass MMS 17g
- Moving mass (without air load) MMD 15.8g
Suspensions
- Stiffness KMS 1.08N/mm
- Compliance CMS 923µm/N
- Equivalent volume to the compliance VAS 23.5L
- Mechanical resistance RMS 1.12N·s/m
Dimensions
- Nominal diameter 6.5″
- 17mm
- Overall diameter 188mm
- Baffle cutout diameter 148mm
- Overall depth 86mm
- Flange thickness 8mm
- Mounting depth 78mm
- Volume occupied by the driver (estimated) 0.62L
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.webp.webp)