BMS 5CN160
8Ω
Coaxial
Nominal diameter | 5″ / 128 mm |
Resonance | 100 Hz |
Q factor | 0.36 |
Sensitivity | 89.3 dB |
Linear excursion | ± 5 mm |
Program Power | 260 W |
.jpg)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 89.3dB
- Frequency response 80 - 20000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 100Hz
- Mechanical quality factor QMS 3.10
- Electrical quality factor QES 0.41
- Total quality factor QTS 0.36
Large signal parameters
- Maximum linear excursion xmax 5mm
- Air volume displaced at xmax VD 38cm³
- Power handling P 130W
- Program power Pmax 260W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 6.9Ω
- Inductance (1kHz) LE 0.39mH
- VC Diameter 38mm
- Winding height HVC 15mm
- Winding material Copper
- Former material Kapton
Magnet
- Flux density B 1.6T
- Force factor Bl 10N/A
- Motor constant Bl/√RE 3.82N/√W
- Air gap height HAG 5mm
- Material Neodymium
Diaphragm
- Effective diameter 98mm
- Effective area SD 75cm²
- Moving mass MMS 9g
- Moving mass (without air load) MMD 8.5g
- Material Polyester
Suspensions
- Stiffness KMS 3.7N/mm
- Compliance CMS 270µm/N
- Equivalent volume to the compliance VAS 2.1L
- Mechanical resistance RMS 1.82N·s/m
Dimensions
- Nominal diameter 5″
- 128 x 128mm
- Overall size 128 x 128mm
- Baffle cutout diameter 117mm
- Overall depth 104mm
- Volume occupied by the driver (estimated) 0.42L
- Net weight 1.14kg
- Frame material Cast Aluminum
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





