BMS 6S117
16Ω
Woofer
| Nominal diameter | 6.5″ / 162 mm |
| Resonance | 80 Hz |
| Q factor | 0.43 |
| Sensitivity | 91.8 dB |
| Linear excursion | ± 5 mm |
| Program Power | 260 W |
.jpg)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 91.8dB
- Frequency response 80 - 3500Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 80Hz
- Mechanical quality factor QMS 3.30
- Electrical quality factor QES 0.49
- Total quality factor QTS 0.43
Large signal parameters
- Maximum linear excursion (one way) xmax 5mm
- Air volume displaced at xmax VD 72cm³
- Power handling P 130W
- Program power Pmax 260W
Voice Coil
- Nominal impedance Z 16Ω
- DC resistance RE 11.4Ω
- Inductance (1kHz) LE 0.64mH
- VC Diameter 38mm
- Winding height HVC 15mm
- Winding material Copper
Magnet
- Force factor Bl 11.3N/A
- Motor constant Bl/√RE 3.35N/√W
- Air gap height HAG 5mm
- Material Ferrite
Diaphragm
- Effective diameter 135mm
- Effective area SD 143cm²
- Moving mass MMS 11g
- Moving mass (without air load) MMD 9.8g
Suspensions
- Stiffness KMS 2.78N/mm
- Compliance CMS 360µm/N
- Equivalent volume to the compliance VAS 10.4L
- Mechanical resistance RMS 1.68N·s/m
Dimensions
- Nominal diameter 6.5″
- 162mm
- Overall diameter 162mm
- Baffle cutout diameter 146mm
- Overall depth 82mm
- Volume occupied by the driver (estimated) 0.52L
- Net weight 1.61kg
- Frame material Cast Aluminum
.png)
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs
Amplion.jpg.webp)
.jpg.webp)
.jpg.webp)