Beyma 5P200Fe
Fe
NdMid Bass
Nominal diameter | 5″ / 125 mm |
Resonance | 72 Hz |
Q factor | 0.33 |
Sensitivity | 90.2 dB |
Linear excursion | ± 5.7 mm |
Program Power | 300 W |
.png)
.png)
- Sensitivity (1W, 1m, infinite baffle) SPL1W 90.2dB
- Frequency response 70 - 10000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 72Hz
- Mechanical quality factor QMS 7.50
- Electrical quality factor QES 0.35
- Total quality factor QTS 0.33
Large signal parameters
- Maximum linear excursion xmax 5.7mm
- Maximum excursion before damage xlim 16mm
- Air volume displaced at xmax VD 54cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.2Ω
- Inductance (1kHz) LE 0.6mH
- VC Diameter 38.1mm
- Winding height HVC 14mm
Magnet
- Force factor Bl 8.5N/A
- Motor constant Bl/√RE 3.73N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 110mm
- Effective area SD 95cm²
- Moving mass MMS 10g
- Moving mass (without air load) MMD 9.3g
Suspensions
- Stiffness KMS 2.22N/mm
- Compliance CMS 451µm/N
- Equivalent volume to the compliance VAS 5.7L
- Mechanical resistance RMS 0.65N·s/m
Dimensions
- Nominal diameter 5″
- 125mm
- Overall diameter 155mm
- Baffle cutout diameter 120mm
- Overall depth 80mm
- Volume occupied by the driver (estimated) 0.61L
- Net weight 2.2kg
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·





