Beyma 5P200Nd
Fe
Nd
Mid Bass
| Nominal diameter | 5″ / 125 mm |
| Resonance | 78 Hz |
| Q factor | 0.30 |
| Sensitivity | 90.7 dB |
| Linear excursion | ± 5.7 mm |
| Program Power | 300 W |
.png)
.png)
Specifications
- Sensitivity (1W, 1m, infinite baffle) SPL1W 90.7dB
- Frequency response 80 - 10000Hz
Thiele & Small parameters
- Resonance frequency (free air) fS 78Hz
- Mechanical quality factor QMS 10.70
- Electrical quality factor QES 0.31
- Total quality factor QTS 0.30
Large signal parameters
- Maximum linear excursion xmax 5.7mm
- Maximum excursion before damage xlim 16mm
- Air volume displaced at xmax VD 54cm³
- Power handling P 150W
- Program power Pmax 300W
Voice Coil
- Nominal impedance Z 8Ω
- DC resistance RE 5.3Ω
- Inductance (1kHz) LE 0.3mH
- VC Diameter 38.1mm
- Winding height HVC 14mm
Magnet
- Force factor Bl 9.9N/A
- Motor constant Bl/√RE 4.3N/√W
- Air gap height HAG 6mm
Diaphragm
- Effective diameter 110mm
- Effective area SD 95cm²
- Moving mass MMS 11g
- Moving mass (without air load) MMD 10.3g
Suspensions
- Stiffness KMS 2.82N/mm
- Compliance CMS 355µm/N
- Equivalent volume to the compliance VAS 4.5L
- Mechanical resistance RMS 0.5N·s/m
Dimensions
- Nominal diameter 5″
- 125mm
- Overall diameter 155mm
- Baffle cutout diameter 120mm
- Overall depth 72mm
- Volume occupied by the driver (estimated) 0.39L
- Net weight 1.2kg
.png)
.png)
Export this driver to a simulation software:
Closed Box Simulator·
Speakerbench
WinISD
Basta!
Hornresp
QSpeakers
SpeakerSim
MfbLabs.jpg.webp)
.jpg.webp)
.jpg.webp)